在線聊天
Specifications
Offset based oil ink1.apply to any offset machine and normal paper
2.made in China
3.passed MSDS,DGM,SGS
offset based oil ink
?
It is?used on all kinds of offset machine. With the ink, first print?image on paper, then transfer?the?image onto various materials by heat transfer press, especially for polyester?fabric. Under high temperature, the ink will become gas and go into fabric. It belongs to gas shading.
?
1.??? Use scope: Applicable to single-color, two-color and multi-color?offset printing machine which supply single paper once. Print materials as follows: chrome paper, coated paper, offset paper, cardboard.
2.??? Product Feature: Good ink-water balance, restore points clear, fast fixation, good stability on the machine.
3.??? Model & Color: SO-D? Magenta\Yellow\Cyan\Black
?????? The model is suitable for offset machine with?more than 8000r/h.
4.??? Use Method: Under normal condition, directly use on the offset machine.
5.??? Attention: Because of temperature, paper, print speed and other factors, may adjust the use method as following rules:
(1)??????????? To speed up the drying, can add mixed desiccant, the dosage is 0-2%.
(2)??????????? With specialized dilute pellicle.
(3)??????????? To adjust liquidity, can add 6# printing varnish, the dosage is 0-5%.
(4)??????????? To reduce the glutinosity and keep liquidity unchanged, can add reducer.
(5)??????????? To reduce the glutinosity and liquidity, can add 52-94, the dosage is 0-5%.
6.??? Often we produce the samples before use. If little deviation, then determine the final product to be printed. Because sublimation offset ink is used for gas shading, the printing ratio should not be printed by ordinary plate-making.
7.? (1)If print red PS-plate, the proportion is 100% magenta and 35%-40% yellow. If print green PS-plate, the proportion is 80% cyan and 90% yellow. (2)If print Asian-yellow PS-plate, the proportion is 10-12% magenta and 7-8% yellow and a little cyan.
8. Transfer printing parameters:
?
Fabric Name | Transfer Temperature | Transfer Pressure | Transfer Time |
Polyester Fabric | 205C-220C | 0.5kg/cm2 | 10-30s |
Polyester low flexibility Fabric | 195C-205C | 0.5kg/cm2 | 30s |
Three-acetate fiber fabric | 190C-200C | 0.5kg/cm2 | 30-40s |
Nylon Fabric | 195C-205C | 0.5kg/cm2 | 30-40s |
Acrylic Fabric | 200C-210C | 0.5kg/cm2 | 30s |
Two-acetate Fabric | 185C | 0.5kg/cm2 | 15-20s |
Gather propionitrile Fabric | 190C-220C | 0.5kg/cm2 | 10-15s |
For alumina plate, stainless steel plate, copper plate and porcelain with coating, the transfer temperature can refer to the above table.
9. Dye degree:
Light fastness | Magenta | Yellow | Cyan | Black |
5-6 | 6 | 3 | 3 |
